Jewelry Specialization: Mastering Design and Photography Techniques

Overview

“The last step is to polish the metal pieces. Again, there are different options for this purpose. I will give you some tips and teach you the polishing technique I use. ”

In this video lesson Domestika addresses the topic: Cast and Finishing Touches 3, which is part of the Domestika online course: Jewelry Specialization: Mastering Design and Photography Techniques. Learn brass jewelry design and creation from sketches to polished pieces using foundational techniques and tools.

Partial transcription of the video

“ Cast and Finishing Touches Now that I've gone through the sanding process using my roughness paper to the finest, gone in with the silicone wheel, also gone in with the split mandrel and the sanding paper on the inside of my ring, I can start to polish. I start to polish a bit using the... Luxor polish, and also... a buff. If you're doing something large, I don't recommend polishing on a flexible shaft or a split mandrel unless you have amazing ventilation because it gets dirty quickly. I polish my rings on a polishing machine because it has a vacuum in the back but not everybody has that...”

This transcript is automatically generated, so it may contain mistakes.

Course summary for: Jewelry Specialization: Mastering Design and Photography Techniques

• Level: Beginner
• 165 students
• 7 units
• 93 lessons (16h 27m)
• 37 downloads

• Category

  Craft

• Areas

  Accessory Design, Arts & Crafts, Digital Photography, DIY, E-commerce, Fashion Design, Jewelry Design, Product Photography