Specialization in Creative Artisanal Printing Techniques

Overview

“You'll be able to see how to make a stamp by cutting the necessary amount of plate, preparing it and the photolithography for exposure to light. During the exposure process, the light will harden the design you want to engrave on the plate, and you can then develop it with water. Using a brush, we'll remove the remaining photopolymer, leaving only the relief that forms our stamp with the chosen design or image. Once dry, we'll have the "matrix" with which we can stamp our image as many times as we like.”

In this video lesson Domestika addresses the topic: Step by step, which is part of the Domestika online course: Specialization in Creative Artisanal Printing Techniques. Learn manual image transfer techniques on wood, fabric, ceramics and more for unique compositions..

Partial transcription of the video

“Step by step In this lesson I'm going to teach you how to make your stamp step by step. It is very simple and we are going to see it in three different steps. First we are going to do the sandwich where we are going to make our stamp, Then we will expose it to the sun and then we will create the relief of the stamp. For this part we need the photopolymer plate that we are going to cut, the photolith that we are going to use and our sandwich, which I remind you which is made up of a glass and a small piece of foam and something to hold, some rubber bands, some tweezers, to be able to sunbath...”

This transcript is automatically generated, so it may contain mistakes.

Course summary for: Specialization in Creative Artisanal Printing Techniques

• Level: Beginner
• 100% positive reviews (8)
• 1518 students
• 7 units
• 79 lessons (11h 8m)
• 56 downloads

• Category

  Craft

• Areas

  Arts & Crafts, DIY, Fine Arts, Fine-Art Photography, Printing, Screen Printing