Plywood furniture: From beginner to advanced

Overview

“In this lesson you will see how to machine tenons and tongues for the fitting between legs, armrests and their crossbars.”

In this video lesson Patricio Ortega (Maderística) addresses the topic: Seat crossbar machining: profiled, which is part of the Domestika online course: Plywood furniture: From beginner to advanced. Learn how to machine components using power tools to create complex plywood furniture..

Partial transcription of the video

“In this lesson, we'll work on the tenon for the leg that will fit into the mortise we made in the previous lesson, and also the tenon for the crosspiece of the armrest. The first thing we need to do is create the male part that will go here, at the bottom we have to make a cut there to achieve this result. What we're going to do is pass the horizontal piece, so this distance, which is approximately 18 millimeters, will now be the height of the router bit, and this distance will be the distance between the fence and the edge of the router bit. We'll start by adjusting the width of the tenon,...”

This transcript is automatically generated, so it may contain mistakes.

Course summary for: Plywood furniture: From beginner to advanced

• Level: Beginner
• 98% positive reviews (51)
• 5104 students
• 4 units
• 22 lessons (5h 12m)
• 9 downloads

• Category

  Craft, Design

• Areas

  Arts & Crafts, DIY, Furniture Design & Making, Interior Design, Woodworking