Carpentry for Beginners: Make Furniture with Wood and Leather

Overview

“Now that all the machining is ready, and the parts are still separated, we will take the opportunity to remove small chips and clean the machining. We will do this by sanding superficially, without modifying the thickness of the pieces, because it can affect the degree of friction that exists in the machining. It is a fundamental stage for the correct structural functioning of the piece. Next, we'll move on to gluing and mounting, starting with the T-beams and then the longitudinal ones.”

In this video lesson Taller Piccolo addresses the topic: Pre-Finish and Assembly 1, which is part of the Domestika online course: Carpentry for Beginners: Make Furniture with Wood and Leather. Craft your own chair out of simple materials by exploring carpentry techniques and learning to use tools like a hand-held milling machine.

Partial transcription of the video

“Pre-finish and assembly In this lesson we will see all the steps to follow to check and verify that everything is correct before mounting. To begin with, we are going to make a count of all the pieces. Let's go back to our scheme, we're going to do a review and we will check that all the parts have the correct machining. Let's briefly review what we've been working on. We remember that we have made 5 cm long machining, 3 cm machining. We also did longitudinal machining. Do you also remember that we did the mechanizations 2.5 cm deep, both in the inner beam and in the longitudinal beam A1 an...”

This transcript is automatically generated, so it may contain mistakes.

Course summary for: Carpentry for Beginners: Make Furniture with Wood and Leather

• Level: Beginner
• 100% positive reviews (18)
• 1665 students
• 5 units
• 19 lessons (3h 33m)
• 13 downloads

• Category

  Craft

• Areas

  Arts & Crafts, DIY, Furniture Design & Making, Interior Design, Woodworking