Product Design with Polyurethane Foam

Overview

“Whether you made the mold yourself or with the help of a carpenter, in this lesson I'll tell you how to line it. Preventing the foam from penetrating into the ribs and crevices of the mold and sticking to this will be essential for the realization of the project. ”

In this video lesson Matteo Pellegrino addresses the topic: How to Pour the Foam, which is part of the Domestika online course: Product Design with Polyurethane Foam. Learn to build objects and furniture using two-part polyurethane foam, from the initial design to demolding.

Partial transcription of the video

“How to pour the foam In this lesson, we will look at the wooden molds that I have already made. We will also see how to protect them from the adhesiveness of the material. What you see is the base of the mold for the coffee table leg. It will be surrounded by edges like the one you see here ... which will serve to contain the expansion of the material. This is a fundamental step for the success of the project is that polyurethane foam do not penetrate inside the ribs of the wood and does not get stuck in any type of hole. Should the foam stick to the mold or creep into some hole, it will be...”

This transcript is automatically generated, so it may contain mistakes.

Course summary for: Product Design with Polyurethane Foam

• Level: Beginner
• 95% positive reviews (20)
• 1175 students
• 4 units
• 11 lessons (1h 33m)
• 2 downloads

• Category

  Craft

• Areas

  Arts & Crafts, DIY, Furniture Design & Making, Interior Decoration, Interior Design