Handmade Faceted Light Shade
de Amran Ali @amranalirubel
- 463
- 22
- 1
Introduction
For this project, I created a geometric faceted cast object that can be used as a vase or light shade. I chose this design because I wanted to explore how a simple 2D pattern can become a strong and attractive 3D form.

Supplies
I used paper, polypropylene sheet, foamboard, masking tape, ruler, pencil, P-cutter, craft knife, cutting mat, casting material, pigment, mixing cup, wooden stick, sandpaper, and sealer.
For the pattern, I could also use simple design software such as Adobe Illustrator or similar vector software.
1. Create a Pattern
I started by drawing a geometric pattern on paper and planning the folds carefully.

2. Score the Polypropylene
I placed the pattern under the polypropylene sheet and scored the fold lines using a P-cutter.

3. Cut Out the Shape
Next, I carefully cut around the outer shape with a craft knife.

4. Fold into a 3D Shape
I folded each scored line back and forth until the flat sheet started forming a faceted 3D shape

5. Add Ends and Tape
I joined the edges with tape and added foamboard ends to complete the mould.

6. Prepare the Workspace
Before casting, I organised the tools and materials so the process would be clean and easy.

7. Mix the Casting Material
I mixed the casting material until it became smooth and consistent. Pigment can also be added here.

8. Pour into the Mould
I slowly poured the mixture into the mould, making sure it reached the inside surfaces.

9. Rotate and Build Layers
I gently rolled the mould to spread the material evenly and repeated the process to make stronger walls.

10. Let It Set
After coating the mould, I left it undisturbed so the material could set properly.

11. Remove the Mould
Once it was firm, I removed the tape and carefully peeled the polypropylene mould away.

12. Sand the Edges
I used sandpaper to remove rough areas and make the edges smoother and cleaner.

13. Finished Piece
The final result is a simple geometric object with an interesting faceted surface.

14. Alternative Use – Light Shade
The same form can also be turned into a decorative light shade, showing how one design can have different uses.
I enjoyed seeing how a flat pattern could slowly become a finished 3D object. The process encouraged me to experiment with shape, materials, and different possible uses.

1 comentariu
Wow! The light through the jesmonite gives Such a lovely effect !
Conectați-vă sau înscrieți-vă gratuit pentru a comenta