Hi! I'm glad you shared your project and congratulations for finishing the course. You have achieved a beautiful skin that in this ad is the most important thing, the only thing I mention that I think could improve your video are a couple of things: The high light in the foreground of the cream jar seemed very high and I think that you have a very stretched light curve in general in the video for what is shot of the image. The face of the model could also be softened with a subtle mask that enhances the face a bit, it has quite a few shadows that harden the image and I think it can help to soften. If you have any questions or comments, do not hesitate to do so. Thank you very much and good project! It shows that you have learned and understood how the program works.
@soniabellan
Thank you for responding so soon, I will take into account your advice to improve the video and I will upload it again, I have other projects that I am improving with what I learned in class as I finish them. I left you a message on your Domestika profile but I don't think you read them :(, I asked you the following query: even though I already have several colored videos, there is something that I still can't do and that is to give the videos that movie look for example ( https://vimeo.com/273069414 , https://vimeo.com/286550288 , https://vimeo.com/276089024 , https://vimeo.com/230595399 , https://vimeo.com/206263240 ) all of these have well-contrasted colors but at the same time they look half washed, the blacks and banks are never 100%, and I have also seen this look in El Colorado where you work, I don't know if the type of camera of the filming or if you use a panel to colorize, I was doing a test ( https://vimeo.com/295193043 ) and I think it's not that bad but something needs to be adjusted, I hope you can help me. Thank you.
@randy_ramos86 Hello, Sorry because I thought I had answered you. I have seen your videos and I congratulate you since I think they are very well, they are with a very well achieved look. As for what you comment on the brightness and the black in your videos, does it have to do only in the export? When you are in the program and you see the graphics, do you have the high brightness and the black stuck to the black area? If it is a question of exporting, note that the Data level of each file is in automatic, and in the Deliver part it is also in Auto since how it interprets the data of the video may be affecting. But from what I see it must not be this. Try to "play" with the curve, to increase the brightness try to raise the "highlights" a little in the tools and in a last node the "Shadows". See if this helps you. We work with a panel and it helps a lot with precision, but just these two tools that I am telling you can be moved quite precisely in the DaVinci interface itself. Let me know if it works for you, thank you very much and greetings!
3 comments
soniabellan
Teacher PlusHi! I'm glad you shared your project and congratulations for finishing the course. You have achieved a beautiful skin that in this ad is the most important thing, the only thing I mention that I think could improve your video are a couple of things: The high light in the foreground of the cream jar seemed very high and I think that you have a very stretched light curve in general in the video for what is shot of the image. The face of the model could also be softened with a subtle mask that enhances the face a bit, it has quite a few shadows that harden the image and I think it can help to soften. If you have any questions or comments, do not hesitate to do so. Thank you very much and good project! It shows that you have learned and understood how the program works.
See original
Hide original
randy_ramos86
@soniabellan
Thank you for responding so soon, I will take into account your advice to improve the video and I will upload it again, I have other projects that I am improving with what I learned in class as I finish them. I left you a message on your Domestika profile but I don't think you read them :(, I asked you the following query: even though I already have several colored videos, there is something that I still can't do and that is to give the videos that movie look for example ( https://vimeo.com/273069414 , https://vimeo.com/286550288 , https://vimeo.com/276089024 , https://vimeo.com/230595399 , https://vimeo.com/206263240 ) all of these have well-contrasted colors but at the same time they look half washed, the blacks and banks are never 100%, and I have also seen this look in El Colorado where you work, I don't know if the type of camera of the filming or if you use a panel to colorize, I was doing a test ( https://vimeo.com/295193043 ) and I think it's not that bad but something needs to be adjusted, I hope you can help me. Thank you.
See original
Hide original
soniabellan
Teacher Plus@randy_ramos86 Hello, Sorry because I thought I had answered you. I have seen your videos and I congratulate you since I think they are very well, they are with a very well achieved look. As for what you comment on the brightness and the black in your videos, does it have to do only in the export? When you are in the program and you see the graphics, do you have the high brightness and the black stuck to the black area? If it is a question of exporting, note that the Data level of each file is in automatic, and in the Deliver part it is also in Auto since how it interprets the data of the video may be affecting. But from what I see it must not be this. Try to "play" with the curve, to increase the brightness try to raise the "highlights" a little in the tools and in a last node the "Shadows". See if this helps you. We work with a panel and it helps a lot with precision, but just these two tools that I am telling you can be moved quite precisely in the DaVinci interface itself. Let me know if it works for you, thank you very much and greetings!
See original
Hide original
Log in or join for Free to comment